Hour Countdown Off/On Timer Setting; Weekly Timer Operation; To Set Weekly Timer Operation - Daikin Siesta ATXM20A2V1B Operation Manual

5.9.2

12 hour countdown OFF/ON timer setting

To start/stop countdown OFF/ON timer operation
1 Press and hold
when blinks, release the button.
Result:
For the OFF timer,
blinks, and the day of the week disappear from the
LCD.
For the ON timer,
blinks. and the day of the week disappear from the
LCD.
2 Press or to change the time setting. The time can be
set between 1~12 hours. Each pressing of the button increases
or decreases the time setting by 1 hour.
3 Press or
Result: and/or and the set time are displayed on the LCD.
The Daikin eye lights orange. The time displayed on the LCD will
automatically count down by 1 hour for every hour that passes.
Example: If the OFF timer is set to 3 hours, the displayed time will
change as follows: 3hr → 2hr → 1hr → blank (OFF)
4 To change the setting back to 24 hour OFF/ON timer, repeat
step 1 when on the home screen when
NOT blinking.
5 To cancel the timer setting, press
To combine the timer display modes
Different display modes (24 hour and 12 hour countdown OFF/ON
timer) can be used for the OFF timer and ON timer simultaneously.
1 For setting, see "To start/stop OFF timer
operation" [ 4 10] and
start/stop ON timer
operation" [ 4 11].
countdown OFF/ON timer
Example:
Display Current time
22:00
Note: If the timer setting is active, the current time is NOT displayed
on the LCD.
5.10

Weekly timer operation

INFORMATION
The following setting procedure is for the wireless remote
control only. However, we recommend to perform the
weekly timer setting using the ONECTA app. Refer to
"5.11 Wireless LAN
information.
With this operation, you can save up to 4 timer settings for each day
of the week.
Example: Create a different setting from Monday to Friday and a
different setting for weekends.
ATXM-A
Daikin room air conditioner
3P728539-4 – 2023.06
or for about 5 seconds;
appears on the LCD and
appears on the LCD and
to confirm the setting.
and/or
.
operation" [ 4 10],
"To start/stop
Set while... Operation
the unit is ▪ Stops at 1:00
operating. (3 hours after
present time)
▪ Starts
6:00. (8 hours
after present
time)
connection" [ 4 13]
for more
Day of the week
Monday
▪ Make up to 4 settings.
Tuesday~Friday
▪ Use the copy mode if the
settings are the same as
for Monday.
Saturday
▪ No timer setting
Sunday
▪ Make up to 4 settings.
▪ ON-ON-ON-ON setting. Enables scheduling the operation mode
and set temperature.
▪ OFF-OFF-OFF-OFF setting. Only the turn off time can be set for
each day.
Note: Be sure to aim the wireless remote control at the indoor unit
and check for a receiving tone when setting the Weekly timer
operation.
INFORMATION
The clock MUST be set correctly before using any timer
are
functions. Refer to
INFORMATION
▪ Weekly timer and OFF/ON timer operation CANNOT be
used at the same time. The OFF/ON timer operation
takes priority. Weekly timer will be in standby,
disappears from the LCD. When the OFF/ON timer is
completed, the Weekly timer becomes active.
"To
▪ The day of the week, OFF/ON timer mode, time and
temperature (only for ON timer) can be set with the
Weekly timer. Other settings are based on previous ON
timer setting.
5.10.1

To set Weekly timer operation

1 Press .
at
Result: The day of the week and the reservation number of the
current day are displayed.
2 Press or
reservation number.
3 Press .
Result: The day of the week is set.
4 Press or
Result: The setting will change as follows:
Display
5 Operation
Setting example
1 2 3
ON OFF ON
25°C 25°C
6:00 8:30 17:30
1 2 3
ON OFF ON
25°C 25°C
6:00 8:30 17:30
—
1 2
ON OFF OFF
25°C 27°C
8:00 10:00 19:00 21:00
clock" [ 4 6].
"4.3 To set the
to select the day of the week and the
and
to select the mode.
Feature
ON timer
OFF timer
Operation manual
4
OFF
27°C
22:00
4
OFF
27°C
22:00
3 4
ON
27°C
blink.
11