Table of Contents
Advertisement
System
Set system type
Use to select the system type that you want to connect to PowerTalk if you have different systems that you
want to analyse.
Set system ID
Use to set some system identification values.
3 parameters can be used to fill in custom information:
Product type [L4] , Facility (e.g. location of product) , Location (e.g. detailed location)
Sync system time
Use to synchronise the system time with your computer time.
Set periodic check [L3]
Use to set the next periodic check after service.
Reset
Use to perform reset actions on your system. It is possible to reset to factory defaults in 2 ways:
Reset driving settings
When "RESET_DRIVING" is entered, all the custom settings become a copy of the normal settings
and the default select profile is normal
Factory reset [L3]
When "FACTORY_RESET" is entered, same settings as "RESET_DRIVING" plus below values will
be set: These counters will be set to 0: max speed, Assist and Drive rim distances, foil errors, hall
errors. And "auto off time" = 15 min, "beeps" =
box, "LOG" =clear
A "FACTORY_RESET" can be used when the WheelDrive transfers to a new end-user.
User
Change user
Use to change PowerTalk user information and to use a different license file
Language
Use to change the language of PowerTalk interface. Dutch or English is available.
Autoconnect
Use to skip the login screen. When set, PowerTalk2 will automatically connect to your system. The setting
is stored in the application, user independent.
Help
Documentation
Use to find more documentation about products that can be connected to PowerTalk. New WheelDrive
special web-link will be available in future.
About
Displays the PowerTalk software version and the installation domain.
PowerTalk2 User Manual - E1801_20181018
on, "Facility" = empty box, "Location" = empty
Rev.A
9
Advertisement
Table of Contents
