Table of Contents
Advertisement
NOTE
● The operation of this product may change without prior notice due to specification
changes or other reasons. Therefore, the contents of this operating manual may differ
from actual operation of the product.
URL: https://www.sekonic.com/support/downloads
● The safety-related precautions such as "Safety Guide and Maintenance" and "Safety
Precautions" conform to the legal and industry standards that were applicable at the time
this operating manual was created. Therefore, this manual may not contain the latest
information. If you are using the previous operating manual, please download and refer
to the latest operating manual.
● Before using this product, please read this "Safety Precautions" for proper operation.
● The product may contain printing materials such as cautions related to safety and/or
printing errors as a supplement to the operating manual.
● The contents of this operating manual may be reproduced for non-commercial purposes
and for personal use only. However, the reproduced material must contain the copyright
notice of our company.
● The screens in this operating manual may differ from the actual displays of the product
you are using. (Colors, letters, etc.)
■
Accompanying Accessories
The following items are included with the Transmitter RT-BR. Please be sure to check that
all noted items are included.
If any items are missing, please contact the distributor or the reseller you purchased the
transmitter from.
Transmitter broncolor
Startup Guide
English
3. Setting Radio System Preference
(for RT-20PW, RT-3PW and RT-EL/PX only)
Transmitter
Use the Custom Setting in Menu to set the
Radio System Preference for the flash system
RT-20PW (344MHz), RT-3PW (433MHz)
in use.
RT-BR (2.4GHz), RT-EL/PX (2.4GHz)
RT-20PW/RT-3PW: ControlTL, Standard or
RT-GX (2.4GHz)
both
RT-EL/PX: Elinchrom Normal/Speed mode or
Startup Guide
Phottix Strato II
4. Selecting Measuring Mode
The steps for installing the transmitter module and meter setup are common
Touch the icon to enter the Measuring Mode
for RT-20PW/RT-3PW (PocketWizard
®
), RT-BR (broncolor
®
), RT-EL/PX
Selection screen.
(Elinchrom
®
, Phottix
®
) and RT-GX (Godox
®
) transmitters.
①
Radio Triggering Flash Mode
Detects flash brightness after Measuring button is
Before installing the transmitter, please read the operating manuals for
pressed to send radio transmitted signal to radio
the meter and transmitter as well as the safety precautions so that you will
receiver connected to flash. Displays F-stop value.
fully understand the features and operation of this product. Then keep the
Radio Triggering Multi Flash Mode
②
manuals and this Startup Guide in a safe place for future use.
Detects and accumulates flash brightness after
Displays in this start up guide is for explanation purpose. Content to be
Measuring button is pressed to send radio
displayed differs depending on which transmitter is installed.
transmitted signal to radio receiver connected to
flash. Displays F-stop value.
1. Downloading Manuals
③
HSS Flash Radio Triggering Mode (for RT-GX only)
Please visit www.sekonic.com to download the latest
Detects flash brightness after Measuring Button is
version of meter and transmitter operating manual.
pressed to send radio transmitted signal to radio
Use the URL below for direct access.
receiver connected to flash. Displays F-stop value.
URL :
https://www.sekonic.com/support/downloads
④
Flash Duration Analysis Radio Triggering Mode
2. Installing the Transmitter
Detects flash brightness after Measuring button is
pressed to send radio transmitted signal to radio
1) Turn OFF the meter.
receiver connected to flash. Displays F-stop value
2) Unlatch and remove the Battery
and flash duration time.
cover.
5. Setting Channel (Studio) and Zone/Group (Lamp)
3) Remove the Transmitter connector
Use Tool Box screen to set the meter (transmitter)
cover.
4) Align the connector pins with those
to the same channel (studio) and zone(s) / group(s)
of the transmitter module and insert the Transmitter.
(lamp) as the receivers.
In addition, set the wireless ID when using RT-GX.
* Be sure to reattach the connector cover if the Transmitter is removed.
5) Insert the Battery cover tabs (three) into the receiving holes in the
* For details, see the operating manuals for
meter body, press the cover down and latch it closed.
transmitter.
v
Safety Precaution
[Radio System Preference screen]
For Proper Operation
RT-20PW
RT-EL/PX
RT-3PW
Before using this product, please read this "Safety Precautions" for
Example of RT-GX
proper operation.
[Measuring screen]
[Measuring Mode
Selection screen]
③
General Safety Information
①
④
②
[Tool Box screen]
WARNING
English
There is a danger of electrical shock when using high
Safety Precaution
voltage strobes.
Avoid contacting the terminals.
This product emits electromagnetic waves.
Do not bring this product close to persons with
pacemakers.
Do not use this product in an explosive atmosphere.
The WARNING symbol indicates the
WARNING
Use of devices emitting electromagnetic waves is
possibility of death or serious injury if the
prohibited in hospitals.
product is not used properly.
The CAUTION symbol indicates the
CAUTION
CAUTION
possibility of minor to moderate personal
injury or product damage if the product is
• Check the material of the neck strap to see if there is any
not used properly.
risk of allergy.
• Be careful of sudden emission of lights from strobes.
The NOTICE symbol indicates cautions
or restrictions when using the product.
NOTICE
NOTICE
Please read all notes to avoid errors in
operation.
• Do not leave this product on car dashboards in hot weather.
This may damage the product.
• Remove the batteries when this product is not in use for a
• Read the Operating Manual before use.
long period of time.
• Keep the Operating Manual on hand for reference at any
• When the desired performance is not achieved, stop using
time.
this product and contact the service center.
• Stop using this product when there are any abnormalities.
• The modification or disassembly of this product is prohibited.
Information for Users on Collection and
• Do not attempt to repair this product by yourself.
• This product is intended only for persons with expert
Disposal of Old Equipment
knowledge.
To protect environment, do not through this device
• Monitor children so that they do not touch this product.
and batteries away with the normal household waste
• Use this product in a usage environment described in the
at the end of those life, but bring them in at an
Operating Manual.
official collection point of your country for recycling.
• This product is not waterproof.
Advertisement
Table of Contents
