Measuring - Sekonic RT-BR Operating Manual

2-3

Measuring

Radio Triggering measurement is available in the following modes:
Radio Triggering Flash Mode
●
Radio Triggering Multiple (Cumulative) Flash Mode
●
Flash Duration Analysis Radio Triggering Mode
●
2-3-1 Radio Triggering Flash Mode
The meter detects flash brightness after Measuring Button is pressed to send radio
transmitted signal to radio receiver connected to flash. F-stop value is displayed for input
ISO sensitivity and shutter speed. Depending on the radio system in use, the meter
controls the output power of flash units and turn the modeling lamps ON/OFF.
Operation
1)
How to use Flash Triggering
1.
Touch the [Measuring Mode] Icon on the Measuring Mode Screen.
The Measuring Mode Screen is displayed.
2.
Touch the [Radio Triggering Flash Mode] Icon (
Measuring Mode Screen.
When it is selected, the display changes to the Measuring Screen.
[Measuring Screen]
[Measuring Mode] Icon
[Measuring Mode Screen]
11
2. About broncolor Radio System
) in
[Measuring Screen]
●