Burner Faults - Viessmann VITOTRONIC 100 Operating Instructions Manual

Heating system with control unit for operation with a constant boiler water temperature

Hide thumbs Also See for VITOTRONIC 100:

Table of Contents

Calling up information

Scanning fault messages

Burner faults

In the event of a burner fault, the

fault" are displayed.

In conjunction with the Vitotronic 100, type CC1E

(see Fig. 3 on page 24)

1. Press the reset button on the boiler burner. You

can access the reset button via an opening in the

outer panel.

See separate boiler or burner instructions.

2. Press

in the navigation area to acknowledge all

fault messages.

3. If the burner fault occurs again, notify your contrac-

tor.

In conjunction with the Vitotronic 100, type CC1I

(see Fig. 4 on page 24)

Tap the following on-screen buttons:

to acknowledge the fault message

to reset the burner

to cancel the operation

3. Notify your heating contractor.

Danger

If faults are not rectified, they can have life

threatening consequences.

Do not acknowledge fault messages several

times in quick succession. Notify your contractor

if a fault recurs. Your contractor will be able to

analyse the cause and rectify the fault.

(cont.)

icon and "Burner

Table of Contents