Deactivating The Display Screen For Cleaning - Viessmann VITOTRONIC 100 Operating Instructions Manual

Further adjustments
Enabling the internet interface (LAN)
The control unit is equipped with a network module. By
means of a Viessmann app, you can operate the con-
trol unit via your smartphone.
Information on connecting and activating the network
module can be found in a separate manual at
www.vitotronic.info
The access code required for commissioning can be
found on the label affixed to the control unit, close to
the programming unit. Stick the access code in these
operating instructions so that you can find it again
when you need it.
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
3. "Settings"
4. "LAN on/off"
5. "ON"
6. to confirm
Settings for the LAN connection
You can choose between a static and a dynamic IP
address. With a dynamic IP address "DHCP", the
internet connection is established automatically. With a
static IP address "STATIC", you have to enter the con-
nection data yourself.
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
3. "Settings"
4. "LAN settings"

Deactivating the display screen for cleaning

If you wish to clean the display screen, you can deacti-
vate it for 30 seconds. This prevents you making set-
tings unintentionally.
18
7. to confirm the notification.
The LAN connection is established automatically
using dynamic connection data ("DHCP").
Note
If the LAN connection is interrupted, it is possible that
your contractor has dialled into your system.
Menu "LAN settings"
If you activate the LAN internet interface, you will have
access to a further menu. In this menu
tings" you can switch to a static IP address
("STATIC").
Deactivating the LAN connection
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
3. "Settings"
4. "LAN on/off"
5. "OFF"
6. to confirm
7. to confirm the notification.
5. Select "DHCP" for dynamic connection data
or
"STATIC" for individual connection data
6. to confirm
7. If you have selected "DHCP":
to confirm the notification.
8. If you have selected "STATIC":
for the required entry field
Using the virtual keyboard, enter your connection
data.
9. to confirm
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
"LAN set-