What to do if...
Fault indicator on display
Any fault in the heating system will be
shown on the display.
You can check the fault code on the dis-
play and then notify your heating con-
tractor accordingly. This allows the heat-
ing contractor to better prepare for the
service call and may save additional
travelling costs.
Resetting a burner fault
Note
If the "
U " fault flashes on the display and
a fault code with "F" is shown, the burner
is locked out.
r
20
f
2
Turn rotary selector "rt" to "U
RESET" for less than 2 s, then back into
the control range.