Further Adjustments; Setting The Display Brightness - Viessmann VITOTRONIC 100 Operating Instructions Manual

Setting the "Language"
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
3. "Settings"

Setting the display brightness

2 settings are available to you:
Brightness for operation
■
■ Brightness for the standby screen
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
3. "Settings"
Setting the "Time" and "Date"
The "Time" and "Date" are set at the factory. If your
heating system has been shut down for a prolonged
period, you may need to reset the "Time" and "Date".
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
3. "Settings"
4. "Date and time"
Signal tone for operation
In the delivered condition, a signal tone is produced
every time a button is tapped. You can turn this signal
tone off and turn it back on if required.
Tap the following on-screen buttons:
1. If required, for the home screen
2. for the "Main menu"
4. "Language"
5. Flag for the required "Language"
6. to confirm
4. "Display brightness"
5. "Brightness, operation"
or
"Brightness, standby"
6. / for the required value
7. to confirm
5. "Date"
or
"Time"
6. Select your preferred format, e.g. "DD-MM-YY",
"24-hour display"
7. / for the required value
8. to confirm
3. "Settings"
4. "Buzzer"
5. "ON"
or
"OFF"
6. to confirm

Further adjustments

17