Service Position; Checking Of Panel, Main And Smps P.c.b - Panasonic SA-MAX3500PU Service Manual

9 Service Position

Note: For description of the disassembly procedures, see the Section 8.
9.1.

Checking of Panel, Main and SMPS P.C.B.

Step 1 Place all P.C.B. on the insulated material as shown.
Step 2 Attach 10P FFC at connector (P1806) on Main P.C.B..
Step 3 Attach 10P FFC at connector (P5001) on Main P.C.B..
Step 4 Attach 24P FFC at connector (P5002) on Main P.C.B..
Step 5 Attach 6P Cable at connector (P1803) on Main P.C.B..
Step 6 Attach 22P FFC at connector (P1802) on Main P.C.B..
Step 7 Attach 9P Cable at connector (P1811) on Main P.C.B..
Step 8 Remove Fan Unit from Rear Panel Unit.
Step 9 Remove Fan Unit from chassis.
Step 10 Attach 2P Cable at connector (CN2104) on Main P.C.B..
Step 11 Attach 2P Cable at connector (CN2105) on Main P.C.B..
Step 12 Attach 13P Cable at connector (CN1851) on SMPS P.C.B..
Step 13 Attach 4P Cable at connector (CN6202) on Button R P.C.B..
Step 14 Attach 4P Cable at connector (CN6201) on Button L P.C.B..
Step 15 Panel, Main and SMPS P.C.B. can be checked as diagram shown.
45