Opening An Existing Design Xpress Project; Copying A Design Xpress Project; Copy Project Dialog - AMX AXT-CA10 Instruction Manual

6. Assuming the IP Address was entered correctly, and the Master is connected properly, you are
presented with a dialog prompting you to enter the User Name and Password for the Master.
7. Enter the User Name and Password, and click the Log On button. Once you are logged on to
the Master, you should see directories associated with your Design XPress project.
8. Paste the copied TXT files into the root of this directory. Do not paste them into a folder or
create a new folder for them; they must reside at the root.

Opening an Existing Design XPress Project

There are three ways to open an existing Design XPress project file. All three methods have the
same result; they each open the Project selected (highlighted) in the Project Selection list (on the
Main Screen).
First select a Project from the Project Selection List, then:

Copying a Design XPress Project

There are three ways to copy an existing Design XPress project file under a new name. All three
methods have the same result; they allow you to rename a copy of the Project selected (highlighted)
in the Project Selection list (on the Main Screen), via the Copy Project dialog.
First select a Project from the Project Selection List, then:
Use the fields in the Copy Project dialog to specify a name for the copied project file (in the Job
Name field), and to enter a description of the project if desired (in the Description field).
The Job Name is required; the Description is optional.

Copy Project dialog

Click on the Copy Project command button (on the Main Screen) to invoke the Copy Project
dialog. Use the fields in this dialog to specify a name for the copied project file (in the Job Name
field), and to enter a description of the project if desired (in the Description field).
The Job Name is required, the description is optional.
Design XPress Programmer's Guide
The default User Name is NetLinx
The default Password is password.
Click the Open Project button on the Main Screen
Select File > Open.
Select Open from the Project Selection List context menu.
Click the Copy Project button on the Main Screen
Select File > Copy.
Select Copy from the Project Selection List context menu.
Using the Design XPress Project Wizard
55