To enter the system name press the enter key
At the end press the Enter key to store the text.
Programming - Points
From the Programming menu by selecting the "Points" item is displayed the following screen, where you can
manually configure each type of addressable device on field ( Detectors or Modules ).
Detectors
DETECTORS
By selecting "DETECTORS" and by confirming the selection through the enter key
you enter the programming procedure for Addressable Sensors.
This procedure is composed of 4 programming folders (to access the folders use the arrow keys)
The display shows by default the first device of the first line.
To select another device use the function keys "- LINE" "+ LINE" ( Lines ) and "- DET" "+ DET"
(detectors )
Detectors MAIN TAB ( HW-Type ID and Text associated with the Detector )
PAGE - 18
NOTIFIER ITALIA
and use the alphanumerical keyboard to enter the text.
Programming Manual
Doc. M-162.1-AM8200-ENG Rev A2
Tap "DET" Number to open the following
window, from which you can directly enter
the number of the sensor to be programmed
without using the "+" and "-" keys.
AM_8200
AM8200_manu-prog-ENG