American Megatrends Atlas PCI-II User Manual page 47

Advanced Setup,
Continued
Primary Master ARMD Emulator As
Primary Slave ARMD Emulator As
Secondary Master ARMD Emulator As
Secondary Slave ARMD Emulator As These options specify the type of standard PC drive
that an ARMD drive will use when attached as a master or slave to the
specified IDE channel. The settings are Auto (AMIBIOS automatically
determines the correct type of drive emulation), Floppy, or Hard Disk. The
Optimal and Fail-Safe default settings are Auto.
If Auto is selected, AMIBIOS configures ARMD drives as follows:
Type of ARMD Device
LS120
Iomega Zip drive
Magneto-Optical drive
st
1 Boot Device This option sets the type of device for the first boot drives that the AMIBIOS
attempts to boot from after AMIBIOS POST completes. The settings are
Disabled, Network, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, SCSI,
CDROM, 1
Optimal and Fail-Safe default settings are Disabled.
2nd Boot Device This option sets the type of device for the second boot drives that the
AMIBIOS attempts to boot from after AMIBIOS POST completes. The
settings are Disabled, Floppy, ARMD-FDD, ARMD-HDD, ATAPI, SCSI,
CDROM, 1
Optimal and Fail-Safe default settings are Disabled.
Chapter 2 AMIBIOS Setup
Drive Emulation Configured
st
IDE-HDD, 2nd IDE-HDD, 3
st
IDE-HDD, 2nd IDE-HDD, 3
43
Floppy
Hard Disk
Hard Disk
rd th
IDE HDD, or 4 IDE-HDD. The
rd th
IDE HDD, or 4 IDE-HDD. The
Cont'd