Step 7 Attach Cables - American Megatrends Atlas PCI-II User Manual

Step 7 Attach Cables

Connectors The motherboard connectors are:
Cable Connector Ends When connecting chassis connectors to the motherboard, make sure
to connect the correct connector end. Most connector wires are color-coded.
Match the color of the wires leaving the switch or LED to the same pin on the
connector end. There may be more than one connector with the same color-
coded wires. If so, follow the wire to the switch or LED. Pin 1 is indicated.
22 Atlantis PCI Pentium II ISA Motherboard User's Guide
Connector
Power supply connector
Keyboard connector
Mouse connector
CPU Fan
Chassis Fan
Infrared
USB connectors
Speaker
IDE LED
Remote Power Switch
Hardware Reset Switch
Power LED (lit when power is on)
Keyboard Lock
Turbo LED (lit when high speed is active)
Suspend Mode Switch
Suspend LED (lit when system in suspend mode)
Serial Port
Parallel port
Floppy drive connector
IDE drive connectors
3 2 1
Cont'd