1.6
Checking Operations
Control the vision sensor using the programmable controller and check the operations.
Make the vision sensor online
Make the vision sensor online and start the communication with the programmable controller.
Set the trigger to the vision sensor
Set the trigger to the vision sensor, and acquire inspection results.
Open [Online][Monitor][Device/Buffer Memory Batch Monitor] in GX Works3 to display devices.
1.
Display devices.
Select [Communication].
Select [Online].
Check that "Connected." is
displayed for the SLMP Scanner.
Input "D1000" in [Device Name]
and monitor the contents of the data
block.
1 THE SLMP SCANNER CONNECTION
1.6 Checking Operations
1
23