Table of Contents
Advertisement
Creating a new job
1.
Create a new job.
As an example, configure the setting of an inspection to see if there is a "CE" mark on the inspection object.
2.
Adjust the lens so that the lens captures an inspection target in [Set Up Image], and configure the settings to acquire the
image.
Select [New Job].
Select [Set Up Image].
Select [Live Video] to adjust the
image. After adjusting the image,
select [Live Camera] again.
Select "Industrial Ethernet".
1 THE SLMP SCANNER CONNECTION
1.3 Vision Sensor Setting
1
13
Advertisement
Table of Contents
