1.7
Contents in Data Blocks
Contents in data blocks
Set a start device and the number of devices to each data block with In-Sight Explorer.
The start device types (such as D, M, and X) and the start devices can be changed. The number of devices, excluding the
ones for the control bit block and status bit block, can be changed. The control details set to each data block are fixed in the
system.
The following shows the control details of the six data blocks where devices have been assigned.
Function
Control bit block (Control)
Status bit block (Status)
Input word block (Input block)
Output word block (Output block)
String command word block (Command)
String command result word block (Command result)
Start device
D1000
D1002
D1010
Number of devices
2
2
8
1 THE SLMP SCANNER CONNECTION
1.7 Contents in Data Blocks
1
25