Replacement And Adjustment - Ricoh PRIPORT SILVER Technical Bulletin

Model:
PRIPORT SILVER/SILVER-V/SILVER-V2/SV2P

REPLACEMENT AND ADJUSTMENT

!
CAUTION
Before removing any of the controller components, make sure to do the
following:
1. If the 'data-in' lamp on the operation panel is blinking or lit, wait until the
document or report is printed. Then turn off the machine.
2. Turn off the main switch. Then disconnect the power cord from the
outlet and the cable from the machine.
NOTE: This manual uses the following symbols:
Screw: #
CONTROLLER BOARD MEMORY
[D]
[A]: Cover
[B]: Keypad board
NOTE: When you attach the connector [C] make sure to attach it in the correct direction and
position [D].
Technical Bulletin
Connector: $
Date:
30-Sep-03
[B]
[C]
C249R951.WMF
PAGE: 5/15
No: 015
R-C231-
[A]