Table of Contents
Advertisement
The CT80 will generate a simple program for you. It will assume you are home on the weekend and
just apply your wake-up and evening temp choices. Your CT80 is now programmed and ready to go.
No additional updates are needed. If you would like to fine-tune the CT80 programming, including
adding or deleting time periods, or reviewing your schedule, please refer to the instructions that follow
regarding programming using the Calendar method.
Calendar Programming Method -
You can use the Calendar screen to review
your current CT80 schedule, or to make
changes after programming in Interview
mode. To create a whole new program:
(With the CT80 in HEAT or COOL mode)
1. Press MENU and then touch PROGRAM
in the upper left of the screen.
2. Touch the CALENDAR icon
side of the screen. A schedule of time slots
with temperatures for today will appear on
the screen.
3. Select a time period or temperature by
touching it, and use the +/- buttons to adjust
up or down. (Press and hold down +/-
buttons for faster scrolling.)
Calendar
Interview
A/
selector
B
- use this
to make
on the left
and save
an alternate
program
CALENDAR SCREEN
HEAT
<Monday>
7: 00a 75
9: 00a 55
M T W
11: 55a 75
2: 55p 85
I
A
B
touch here to
delete
create a new
time slot
DAY advance
to next day
o
o
o
o
COPY>
copy these
time/temps to
the next day
7
PG
Advertisement
Table of Contents
