Table of Contents
Advertisement
Display of electric meter data or connect to a Home Automation network for HA functionality with
remote access to your HVAC system and home conditions.
To Insert a RTM-1 radio module:
1. Power off the CT80.
2. Insert the radio module in right side slot on the back of the CT80 first.
3. Power up CT80.
NOTE: DO NOT HOT SWAP RTM-1 USNAP modules this can damage the thermostat or radio
modules.
To MATE to a network:
1. Select MENU, then NETWORK.
2. Make sure the network is ON.
3. Select the Radio Icon for the radio you want to mate
with the network.
4. Touch Mate. Initiate the mate procedure on the network
device side. Wait for radios to sync.
5. The CT80 will display the netname (network name) it is
connected to under "network".
INFORMATION
This MENU function displays
16
16
PG
PG
Advertisement
Table of Contents
