Manual Screen - Radio Thermostat CT80 Operation Manual

MANUAL Screen

temporary changes to your CT80's operation. The CT80 has 6 manual override commands. These
are accessed by pressing the +/- buttons or touching the current temperature on the HOME screen.
IMPORTANT: The Mode
HEAT or COOL to access the manual screen.
Temporary OVERRIDE -
• Press the + / - buttons to select your
desired temporary Target Temperature.
• Press HOME to return to operation.
The TEMPORARY icon will display
indicating you have modified the Target
Temperature for the current Time Slot
only.
HOLD -
This will hold the target temperature
you set indefinitely, until you turn it off.
Take care using the HOLD function. To
set a hold, touch HOLD to initiate a hold temperature. You can use the +/- buttons to select your hold
temperature. The HOLD icon will display on the HOME screen indicating you have changed the Target
Temperature. The system will HOLD this temperature until you return to this screen and de-select HOLD,
by touching it. (HOLD is also canceled when you change the mode
The Manual Screen control screen is where you can make
must be in
Current Target
Temperature
use the +/- buttons
to temporarily modify
target temp setting
Holds current
temp indefinitely
Target Temp
until you remove
HOLD
AUX heat
for HEAT Pumps
EMER HEAT
ROOM
o
77
TEMP
HOLIDAY
HOLD
PROGRAM VACATION
Set-up
holiday
PROGRAM
).
FRESH AIR
for HEAT or COOL
FRESH AIR
HEAT
o
F
Activates
Vacation
HOLIDA Y
preset temp
program
4 4
PG PG