Table of Contents
Advertisement
MENU Functions
PROGRAM
The CT80 is designed for
fast and easy programming with a simple, on-
screen interview
. Just answer the
questions and the CT80 takes care of the rest.
A calendar option is also available
tuning with up to seven time slots. HEAT and
COOL are programmed separately.
Programming Using the Interview Method
(Fastest and Easiest ):
1. Make sure the CT80 is in either HEAT or
COOL using the MODE button
2. Press MENU on the control bar and then touch PROGRAM in the upper left of the screen. The
PROGRAM BY INTERVIEW screen will come up.
3. Read each question and fill-in your answers by touching the answer in brackets <78
and using the +/- buttons to adjust. Press and hold +/- buttons for faster scrolling.
4. Touch
(the scroll down) arrow in the lower right corner of the screen to go to the next set of
questions and continue answering. Use
5. Once the interview is complete, press HOME to return to the Home screen.
If you want to change entries just go back to step 1 and modify your answers.
INTERVIEW SCREEN
for fine-
Interview
Calendar
.
(scroll up) to go back to a previous question.
PG
PG
Scroll control
Scroll control
> to highlight
o
6
6
Advertisement
Table of Contents
