Setting up the Printer
This chapter explains the way of installing a tape cartridge, connecting the AC adapter, and installing the battery
(LW-Z5010 Series only).
Installing the Tape Cartridge
CAUTION
Check that the printer is powered off.
1
Remove any slack in the tape inside the cartridge.
2
Open the top cover.
3
• Make sure to turn the printer off when installing a tape cartridge.
• Make sure to use a tape designated by Epson.
• When you replace the tape cartridge, make sure to adjust the half cut depth with a new
tape.
U"Adjusting Half Cut Depth" on page 35
Setting up the Printer
23