Connecting To Your Device; Connecting Via Wi-Fi; Connecting Directly With A Device (Simple Ap Mode) - Epson LabelWorks LW-Z5000 Series User Manual

Connecting to Your Device

This chapter describes typical methods for connecting the printer to your device.
For more details, instructions for changing the connection settings, and the other methods to connect with a
computer, see "Network Configuration Guide" that is included in the Label Editor (application software) package.
For instructions to set up your device, such as a computer, smartphone, access point, see the documentation for
the device.

Connecting via Wi-Fi

Connecting Directly with a Device (Simple AP mode)

The following explains the procedure for connecting using SSID. For information on the other methods, see
"Network Configuration Guide".
Connecting with a Computer (SSID)
Change the connection mode of the printer
1
U"Part Names and Functions" on page 15
D
Print a status sheet to know the security key of the printer
2
U"Printing a Status Sheet" on page 33
D
3 Select the printer on the computer, and then enter the security key
Connection is complete.
D
Install Label Editor and the printer driver on the computer
4
U"Checking the Printer Settings" on page 33
When a message saying that the setting is complete, you can operate the printer from the computer.
Connecting to Your Device
28