Configuring Anti-Virus Detection; Configuring The Mcafee Module - American Dynamics Intellex Intellex Ultra Installation And Configuration Manual

The Intellex Anti-Virus (AV) modules are compatible with:
• McAfee 7.1 Enterprise Edition
• Symantec AntiVirus 8.1 Corporate Edition
Note
Refer to McAfee or Symantec documentation for setup and use information.

Configuring the McAfee Module

1 Install McAfee 7.1 Enterprise Edition software.
2 Verify that it is installed on Intellex: the virus shield icon must appear in the system tray.
If McAfee is not installed, an error message appears when you try to install it. The message
states that the anti-virus software was not detected and that you must install it.
3 Using a standard PC with Internet access, go to http://americandynamics.net.
4 Click Intellex. In the Anti-Virus Software Configuration Tools section, find McAfee Anti-Virus
Configuration Tool for Intellex, download it to your hard drive, and copy it to a CD.
5 Exit Intellex to Windows. See page 17.
6 Copy the CD to the Intellex desktop.
7 Run the software from your desktop and follow the installation instructions.
After successful installation, the Intellex About Box updates in the Intellex application to:
Intellex AntiVirus Configuration 1.0.
Note
If an Intellex 3.x system is undetected, an error message appears. The message states that the
configuration tool works only for Intellex with Windows 2000.
8 The configuration tool creates 2 virus scan jobs, which are visible in the McAfee VirusScan
console:
• Scanning Memory
• Scanning All Fixed Disks
Note
The CPU utilization dialog defaults to 10% to reduce system loading by the anti-virus software.
If scan jobs are already configured in the system, the configuration tool may reset or remove
the applications settings. Previous settings are saved in the registry. You must schedule the 2
virus scan jobs created by the configuration tool. Schedule these during a period of low usage
to avoid losing frames of recorded video.

Configuring Anti-Virus Detection

53