Removing A User-Defined Camera Handler - American Dynamics Intellex Intellex Ultra Installation And Configuration Manual

A standard Windows file browsing window appears.
2 From the Windows dialog, select the handler definition file for your dome camera, and click
Open, which closes the Windows dialog. The User-Defined Handlers screen appears with the
handler you selected, indicating Intellex now recognizes it.
3 Click OK. The Setup Options menu reappears.
4 From the Setup Options, click Cameras, and select the Camera Control tab.
5 From the dropdown menu next to the appropriate camera, highlight the handler you want to
assign to that camera, and click Setup. The camera handler setup screen appears. Refer to
step 3 on page 22.

Removing a User-Defined Camera Handler

To clear a handler from the list, from the User-Defined Handlers tab, highlight the item, click
Remove, and then OK.
Note
If you click Remove, and then click OK, any cameras that were using a deleted handler are no
longer configured for camera control.
Configuring the Intellex
Installation and Configuration Guide 23