Acc Compression; Frame Rates; Resolutions; Video Loss Detection - American Dynamics VideoEdge User Manual

4-channel ip encoder
Hide thumbs Also See for VideoEdge:
Table of Contents

Advertisement

ACC Compression

Three quality levels (Super, Normal, and Extended Record) are available for each camera.
Two sensitivity levels (Normal and High) are available for each camera.

Frame Rates

Table 1-1 — Frame rates
NTSC
120 IPS @ 4CIF
120 IPS @ 2CIF
120 IPS @ CIF
Note
The IP Encoder supports a maximum or 30/25 (NTSC/PAL) images per second per video channel
at 4 CIF. Actual frame rates may be less due to high motion. Multiple Ethernet connections
(Browser and/or Intellex IP) can limit the maximum available IPS rate per connection.

Resolutions

Resolution
Table 1-2 —
NTSC
320x240 pixels
352x240 pixels
640x240 pixels
704x240 pixels
640x480 pixels
704x480 pixels

Video Loss Detection

In the event of video loss, an alarm is generated. The alarm is automatically cleared when the
video is restored.

Bandwidth Throttling

The IP Encoder supports bandwidth throttling and is set on a individual camera and client basis.
The maximum bandwidth is selectable between 30 kb/s and 4 Mb/s. The Bandwidth throttling is
configured on the Intellex IP.

Advanced Features

• PTZ camera control using serial ports or Sensornet, with the following supported Camera
handlers:
PAL
100 IPS @ 4CIF
100 IPS @ 2CIF
100 IPS @ CIF
PAL
320x288 pixels
(for use with Live Video feature only)
352x288 pixels
640x288 pixels
(for use with Live Video feature only)
704x288 pixels
(for use with Live Video feature only)
640x576 pixels
704x576 pixels
Introduction
1-3

Advertisement

Table of Contents
loading

Table of Contents