Steps
1. Align the screw hole on the solid-state drive bracket with the screw hole on the palm-rest and keyboard assembly.
2. Replace the screw (M2x4) that secures the solid-state drive bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the
solid-state
drive.
2. Install the
base
cover.
3. Follow the procedure in
Fans
Removing the fans
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image(s) indicate the location of the fans and provides a visual representation of the removal procedure.
26
After working inside your
Before working inside your
computer.
computer.