Material Recirculation Manifold With Over Pressure Relief Valve - Graco XPs-hf Series Operation, Repair, And Parts

Parts

Material Recirculation Manifold with Over Pressure Relief Valve

Assembly 262783 (XP50s-hf); 262806 (XP70s-hf)
713
711
704
6 3
2
1. Apply anaerobic pipe sealant to all non-swiveling pipe
threads.
2
Torque to 28-32 ft-lb (38-43 N•m).
3
Apply blue anaerobic adhesive to threads.
Ref Part Description
701 16D693 BLOCK, manifold, recirculation
702† 262520 VALVE, over pressure relief, silver,
XP70s-hf
262809 VALVE, over pressure relief, gold,

XP50s-hf
703 156684 UNION; 1/2 in. male x female
704 112309 NUT, hex, jam
705 198241 PLUG, port, pressure; 11/16-24
707 114434 GAUGE, pressure, fluid, sst; 10k psi
708 100840 FITTING, elbow, street; 1/4 npt
709 156971 FITTING, nipple; 1/4 npt x npsm
710 557349 PLUG, dry seal 1/8 npt
711 16E334 HANDLE, manifold
712 16E332 ROD, connecting, handle
713 124859 SCREW, button head
716 156684 FITTING, nipple, 1/2 npt x 1/2 npt
76
712
718
720
5
708
702
3 4
705
717
701
707
709
708
710
717
4
Further tighten either valve (302) as required to line
up handle straight across.
5
Apply grease to spring ends.
6
Torque to 70-90 in-lb (7.9-9 N•m).
Ref Part
Qty
1 717 121399 O-RING, solvent resistant
2 718 124676 RING, snap, external
720 150829 SPRING, compression
2
751 159239 FITTING, nipple, pipe, reducing
752 156173 UNION, swivel
2
2  Not shown. Shipped loose.
2
 For XP50s-hf systems only.
2
† For XP70s-hf systems only.
4
2 NOTE: Loose fittings are supplied with replacement manifold
to also fit Series A (XP70s) Proportioners with 3/8 in. mix
2
manifold ball valves.
2
1
* Fitting orientation can be modified to allow for easier routing
2
of recirculation lines. Remove fitting (708) and reinstall fitting
2
(709).
708*
709*
703
720
5
718
705
702
2 3 4
716
r_258988_3a0420a_1c
Description
713
711
704
3 6
Qty
2
2
2
2
2
3A6283F