Lincoln Electric POWER WAVE 300C Operator's Manual page 32

POWER WAVE 300C
®
USER INTERFACE NAVIGATION
SMAW HOME SCREEN (ADVANCED VIEW)
FIGURE B.6
2
3
4
1
1. Menu Bar - Use the Menu knob to scroll through the op�ons along the bo�om of the screen.
Press the knob to select the highlighted op�on.
2. Current Se�ng - Sets the desired current, use le� knob to adjust.
to adjust the allowable ranges to be set by a remote.
3. Weld Mode
4. Output Indicator (Note: Output is "ON" at all �mes in S�ck process).
5. Arc Force
6. Hot Start
7. Dual Procedure Indicator – Displays the ac�ve welding procedure/schedule. Pressing the
ac�ve process bu�on switches between the procedure/schedule op�ons.
8. Memory Name
8
B-10
OPERATION
7
5
6