Searching For Television Stations - Grundig 26 VLC 4010 C Manual

SETTINGS
Searching­for­television­stations
T he television has an automatic tuning function,
which first searches for digital TV channels and
then analogue ones.
You start the search and can then sort the televi-
sion stations into your order of preference.
There are 1000 presets for digital channels and
100 for analogue channels, to which you can
assign TV stations from the antenna or from the
cable connection (analogue channels).
1 Press »POWER«, »1...0« or »P+« or »P–« to
switch on the television from standby mode.
– T he »Installation Guide« menu appears when
the device is first switched on.
Installation Guide
Language Settings
Active Antenna Power
Auto Tuning
Select
2­Press »
« or » « to select the language.
r e
Help:­
If the »Installation Guide« menu does not ap-
7
pear on the screen, make the setting by fol-
lowing the instructions on returning the tele-
vision to its factory condition on page 25.
Note
The antenna power supply may only be
7
switched on if the antenna is actually an ac-
tive indoor antenna with a signal amplifier
and it is not already supplied with a voltage
via a mains plug (or similar supply).
Otherwise you may cause a short circuit and
7
irreparably damage your antenna.
3 Select the »Active Antenna Power« with »
or » «.
w
Press » « or » « to switch on the antenna
r e
voltage »On« (Only DVBT Channels).
4 Select »Auto Tuning« with »
confirm with »OK«.
– »Country Selection« is active.
5 Press » « or » « to select the country.
r e
10­
ENGLISH
­ - --------------------------------------------------------------------------------------------------------------------------------------
English
Off
s
Exit
« or » « and
q w
6 Select the »Scan Type« with »
Press » « or »
r
to search for only digital television stations
(DTV), only analogue television stations (ATV)
or both (ATV & DTV).
7 Select »Time zone« with »
Press » « or »
r
8 Select »TV Connection Type« with »
Press » « or »
r
tion type:
– » Antenna« to search for terrestrial TV chan-
nels (DVB-T);
Help:­
If you select »Cable« the screen for selecting
7
the scan type appears. See Tuning all digi-
tal television stations with cable connection
on page 37.
9 Press »OK« to start the search for terrestrial
TV channels.
– T he »Searching...« menu appears, and the
search for TV stations begins. This may take
several minutes depending on the number
of television stations received.
– T he search is ended when the »Programme
Table« appears.
Note:
The search can be ended prematurely with
7
»M«.
Changing­ stored­ channels­ for­
digital­stations
You can change the order of the channels found
as required, delete channels you do not need
and block access to certain presets (parental
control).
After the search the television switches to chan-
nel position 1 and the »PROGRAM TABLE«
menu appears.
In the »Programme Table« Menu press »●«
(blue) to switch between »Programme Table
«
q
– ALL TYPE«, »Programme Table – DTV«, »Pro-
gramme Table – RADIO« and »Programme
Table – ATV«.
Press »●« (red) to display the channels assigned
to a network.
Press »P+« to switch the channel list to the next
page, press »P–« to switch it back to the previ-
ous page.
« or »
q
« to select whether you want
e
« or » «.
q w
« to select time zone.
e
q
« to set the required connec-
e
«.
w
« or » «.
w