SPECIALSETTINGS
7 Select the security query (»Yes« button) with
»
« or »
« and press »OK« to confirm;
r
e
or
select »No« with »
want to start the search) and press »OK« to
confirm.
– T he »Searching...« menu appears, and the
search for analogue TV stations begins. This
may take several minutes depending on the
number of television stations received.
– T he search is ended when the »Programme
Table« appears.
Note:
You can stop the search by pressing »
7
M
8 Press »
« to end the setting.
Tuningtheanaloguetelevisionchan-
nels by entering the channel num-
bers
1 Open the menu with »M«.
– The »PICTURE« menu appears.
2 Select the »CHANNEL SETUP« menu with »
or »
«.
e
3 Select »Analogue Manual Tuning« with »
»
« and press »OK« to confirm.
w
Analogue Manual Tuning
System
Current Channel
Fine Tuning
Search
Programme No
Skip
Frequency
Select
4 Select the »Programme No« by pressing »
or »
« and press »
w
r
5 Select »Current Channel« with »
6 Press »OK« to choose between »S« (special
channel) or »C« (channel).
-----------------------------------------------------------------------------------------------------
« or »
« (if you do not
r
e
M
q
BG
S 21
+ 00
a s
a s
1
Yes
443.25 MHz
Save
Back
Exit
« or »
« to set the preset.
e
« or »
q
w
7 Enter the channel number with »
by step or with »1...0« directly.
Note:
The current system is displayed in the »System«
7
line. If the colour and/or sound is not functioning
correctly, select »System« with »
Select the necessary settings with »
7
8 Press »●« (red) to finish the setting.
Note:
To set other television stations, repeat steps
7
4 to 8.
9Press »M« to end the setting.
Fine tuning analogue television
«.
stations
The television automatically tunes itself to the best
possible reception. You may need to fine tune it
manually in areas where the reception is poor.
1 Select stations with »1...0« directly or step by
step with »P+«, »P–«.
2 Open the menu with »M«.
«
r
– The »PICTURE« menu appears.
3 Select the »CHANNEL SETUP« menu with »
« or
or »
«.
e
4 Select »Analogue Manual Tuning« with »
»
« and press »OK« to confirm.
w
5 Select »Fine Tuning« with »
with »
« or »
r
6 Press »●« (red) to finish the setting.
7Press »M« to end the setting.
«
q
«.
« or »
r
« or »
q
« or »
q
«.
e
ENGLISH
« step
e
«.
w
« or »
«.
r
e
«
r
« or
q
« and set
w
27