Grundig 26 VLC 4010 C Manual page 27

SPECIAL­SETTINGS
Changing­stored­channels­for­an-
alogue­stations
If channels were stored with the automatic chan-
nel search during the tuning of the television chan-
nels, you can delete them. You can also store
stations in a different preset, change or enter the
name of a stations as well as skip channels.
Select­channel­lists
1 Open the menu with »M«.
– The »PICTURE« menu is displayed.
2 Select the »CHANNEL SETUP« menu with »
or » « and confirm with »OK«.
e
3 Select »Programme Table« with »
and press »OK« to confirm.
Programme Table
Service Type ALL TYPE
Network All Networks
CHANNEL SETUP CA FAV1 FAV2 FAV3 FAV4
1 ARD
DTV
2 ZDF
DTV
3 SAT 1
DTV
4 ProSieben
DTV
5 3sat
DTV
6 kabel eins
DTV
7 WDR 3
DTV
8 N24
DTV
9 Doku
DTV
Network
Select
Delete
Prev. Page
Note:
Additional operations are explained in the
7
following sections.
Deleting­channels
1 In the »Programme Table« menu, press »
» « to select the channel to be deleted and
w
3
press » « (yellow) to confirm.
2 Press »●« (green) to confirm the deletion.
Note:
Press »●« (red) to delete all the channels.
28­
ENGLISH
­-----------------------------------------------------------------------------------------------------
«
r
« or » «
q w
D
-
Move Back
Service Type Exit
Next Page
« or
q
Sorting­television­channels
1 I n the »Programme Table« menu, press »
» « to select the channel to be moved.
w
2­Highlight the channel with »●« (green).
3 Select a new channel position by pressing
»1...0«. and then press »OK« to confirm.
–All of the channels that follow move up one
position.
Note:
To sort the other television channels repeat
7
steps 1 to­4.
Entering­ the­
(maximum­of­8­characters)
1 In the »Programme Table« menu, select the de-
sired channel with »
2 Highlight the channel with »●« (red).
3 Select letters or numbers with »
move to the next position with »
repeat.
4 Store the channel name with »OK«.
Note:
To enter additional channel names, repeat
7
steps 1 to 4.
Skipping­television­channels
You can highlight television stations to be
skipped when you select with »P+« or »P–«. It is
still possible to select using the number buttons.
1 I n the »Programme Table« menu, select the
television channel with »
2 P ress »
« to switch to the »
e
and press »OK« to highlight the television
channel.
– The channel is marked with »
Note:
Channels can be enabled again. Press »
7
or » « to select the channel, press »
w
switch to the symbol »
to enable the channel again.
q
channel­ names­ ­
«, » «, » « or » «.
q w r e
« or »
q
« or » « and
r e
« or » «.
q w
« symbol
-
«.
-
e
« and press »OK«
-
« or
«,
w
«
q
« to