Grundig 26 VLC 4010 C Manual page 18

PARENTAL­CONTROL
1 Open the menu with »M«.
–The »PICTURE« menu is displayed.
2 Select the »PARENTAL CONTROL« menu with
» « or » « and press »OK« to confirm.
r e
3 Enter the PIN code »0000« with »1­...­0«.
PARENTAL CONTROL
Lock System
Set PIN
Block Programme
Parental Guidance
Panel Lock
Select
Note:
Additional operations are explained in the
7
following sections.
Lock­the­system
Using this function, you can lock the television
menus so that they can only be accessed by en-
tering a PIN code.
1 Select »Lock System« with »
2 Activate the lock with »
3 Press »M« to end the setting.
Changing­the­PIN­code
Instead of the default code »0000«, you can
enter a personal code.
Please take note of your personal code.
1 Select »Set PIN« with »
»OK« to confirm.
2 Enter your new personal PIN code with »1...0«
in four digits.
3 Enter your personal PIN code again with
»1...0«.
4 Press »M« to end the setting.
Off
s
s
4
Off
Back
Exit
« or » «.
q w
« or » «.
r e
« or » « and press
q w
­ - -------------------------------------------------------------------------------------------
Block­a­television­channel­
You can block individual television channels
which are not suitable for children using a per-
sonal PIN code.
1 Select »Block Programme« with »
and press »OK« to confirm.
– The »Block Programme« menu is displayed.
2 S elect the television channel in the »Block
Programme« menu with »
»●« (green) to confirm.
– I n the »Block Programme« menu the symbol
»D« is displayed after the station.
3 Press »M« to end the setting.
Note:
Press » « or »
q
7
and switch off the block by pressing »●«
(green).
Authorise­channels
There are movies which contain contents or
scenes which are not suitable for children.
Certain programmes contain information which
identifies these contents or scenes and have
been given an access level from 4 to 18. You
can select one of the access levels and thus au-
thorise the playback.
1 Select »Parental Guidance« with »
2 Select the access level with »
3 Press »M« to end the setting.
Blocking­the­control­panel­(parental­
control)
If the control panel block is activated, the buttons
on the television do not work.
1 Select »Panel Lock« with »
2 Activate (On) or deactivate (Off) the panel
block with »
r
3 Press »M« to end the setting.
q
« or » « and press
q w
« to release the channel
w
q
« or »
r
« or » «.
q w
« or » «.
e
ENGLISH
« or » «
w
« or » «.
w
«.
e
19­