Television Operation; Basic Functions - Grundig VISION 3 26-3821 Manual

16

TELEVISION OPERATION

Basic functions

Switching on and off
8
1
Press » «, »1...0« or »P+« or »P-« to switch on the device from
standby mode.
8
2
Press the » « button to switch the television to standby mode.
Selecting channels
1
Use »1...0« to select channels directly.
2
Press »P+« or »P-« to move up and down channels.
3
Open the channel list by pressing »OK«, select the station with
»P+« or »P-« and press »OK« to confirm.
– The display disappears automatically after a short while.
Selecting AV channels
1
Call up the »SOURCE« menu with »AV«.
2
Select the desired AV channel position with »P+« or »P-« and
press »OK« to confirm.
3
Switch back to the television channel with »1...0«.
Adjusting the volume
1
Adjust the volume with »
Muting
1
p
Use » « to switch the sound off (mute) and to switch it on again.
Displaying time
1
You can display the time by pressing the »
Displaying information
1
Press »?« to display the information.
– The display disappears automatically after a short while.
Picture settings
You can select different picture settings.
1
Select the desired picture setting from »USER«, »SOFT«, »NAT-
URAL« or »RICH« with »
– You can alter the »USER« picture setting, see the "Picture
settings" chapter on page 13.
4 3
« or » «.
¥
« button.
z «.
------------------------------------------