Television Operation; Basic Functions - Grundig VISION 6 Manual

TELEVISION OPERATION

Basic functions

Switching on and off
8
1 Press » «, »1...0« or »P+« or »P-« to switch on the device from
standby mode.
8
2
Press the »
Selecting channels
1 Use »1...0« to select channels directly.
2 Press »P+« or »P-« to move up and down channels.
3 Open the channel list by pressing »OK«, select the station with
»P+« or »P-« and press »OK« to switch off the channel list.
Selecting AV channels
1 Call up the »SOURCE TABLE« menu with »AV«.
2
Select the desired AV channel position with »P+« or »P-« and
press »OK« to confirm.
3 Switch back to the television channel with »1...0«.
Adjusting the volume
1 Adjust the volume with »
Muting
p
1 Use » « to switch the sound off (mute) and to switch it on again.
Displaying time
1 You can display the time by pressing the »
channels with teletext).
Displaying information
1 Press »?« to display the information.
– The display disappears automatically after a short while.
Freeze-frame
If you wish to view a particular scene for longer, you can freeze the
frame of the current programme.
(There are no functions on the »HDMI« AV preset.)
3
1 Press » « (yellow).
2
To quit this function, press »
« button to switch the television to standby mode.
4 3
« or »
3
« again.
------------------------------------------
«.
¥
« button (only for
15