Picture Settings - Grundig VISION 3 26-3821 Manual

PICTURE
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
DNR LOW
TINT
COLOUR TEMPERATURE NORMAL
NCM ON
SABC ON
DYNAMIC CONTRAST ON
BACKLIGHT
CHANGE BACK
SETTINGS

Picture settings

1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »PICTURE« with »P+« or »P-« and confirm with »OK«.
– The »PICTURE« menu appears.
Brightness, contrast, colour and sharpness
1
Select »BRIGHTNESS«, »CONTRAST«, »COLOUR« or »SHARP -
NESS« with »P+« or »P-« and press »
setting.
Note:
The »BRIGHTNESS«, »CONTRAST«, »COLOUR« and »SHARP-
NESS« settings can only be adjusted if the »SABC« function is
disabled.
DNR (noise reduction)
You can improve the picture quality if the TV or video signal is poor.
1
Select »DNR« with »P+« or »P-« and adjust the setting with »
3
or » «.
Tint
Compensates for colour discrepancies in NTSC programmes.
1
Select »TINT« with »P+« or »P-« and adjust the setting with »
3
or » «.
Colour temperature
You can change the colour from warm to cold hues.
1
Select »COLOUR TEMPERATURE« with »P+« or »P-« and press
4 3
» « or » « to adjust the setting.
NCM (Natural Colour Management)
Improves the colour saturation.
1
Select »NCM« with »P+« or »P-« and press »
»ON«.
SABC (Scene Adaptive Brightness Control)
Automatic brightness, contrast, colour and sharpness setting.
1
Select »SABC« with »P+« or »P-« and press »
»ON«.
Dynamic Contrast
The background illumination is adjusted according to the picture
content in order to optimise the contrast.
1
Select »DYNAMIC CONTRAST« with »P+« or »P-« and press
4 3
» « or » « to select »ON«.
----------------------------------------------------------------------------------------------------
4 3
« or » « to change the
4 3
« or » « to select
4 3
« or » « to select
4
«
4
«
13