Grundig VISION 3 26-3821 Manual page 30

SETUP
SYSTEM
CHANNEL S04
FINE TUNE
r e
SEARCH
PROGRAM NO P02
STORE
AUTOPROGRAM
CHANGE BACK
SETUP
SYSTEM
CHANNEL S04
FINE TUNE
r e
SEARCH
PROGRAM NO P02
STORE
AUTOPROGRAM
G G
0 - 9
CHANGE BACK
SETUP
SYSTEM
CHANNEL S04
FINE TUNE
r e
SEARCH
PROGRAM NO P02
STORE
AUTOPROGRAM
G G
C/S
0 - 9
OK
CHANGE BACK
SETUP
SYSTEM
CHANNEL S04
FINE TUNE
r e
SEARCH
PROGRAM NO P02
STORE
AUTOPROGRAM
STORE BACK
30
SPECIAL SETTINGS
Fine tuning television channels
The television automatically tunes itself to the best possible recep-
tion. You may need to carry out manual fine tuning in areas where
there is poor reception.
1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
B/G
Select »SETUP« with »P+« or »P-« and confirm with »OK«.
– The »SETUP« menu appears.
0
3
Select »FINE TUNE« with »P+« or »P-« and set it with »
or »
4
Select »STORE« with »P+« or »P-« and confirm with »
– The »STORED« message appears.
5
Press »i« to finish the setting.
Setting the television channels by entering the
channel numbers
B / G
0 1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »SETUP« with »P+« or »P-« and confirm with »OK«.
– The »SETUP« menu appears.
3
Select »PROGRAM NO« with »P+« or »P-« and set the preset
channel with »
4
Select »CHANNEL« with »P+« or »P-«.
5
B / G
Press »OK« to choose between »S« (special channel) and »C«
(channel).
0
6
Press »
»1...0« to enter the channel number directly.
Note:
The current system is automatically displayed in the »SYSTEM«
line. Select »SYSTEM« with »P+« or »P-« if the colour or sound
are incorrect. Select the setting required with »
7
Select »STORE« with »P+« or »P-« and confirm with »
B / G
– The »STORED« message appears.
0
Note:
To set the other television stations, repeat steps
8
Press »i« to finish the setting.
3
«.
4 3
« or » «.
4 3
« or » « to switch up and down channels or use
------------------------------------------------------------------
4
4 3
« or »
4
3 to 7.
4
«
3
« or » «.
«.
3
« or » «.