Teletext Mode; Flof Text And Normal Text Mode; Additional Functions - Grundig VISION 3 26-3821 Manual

TELETEXT MODE

FLOF text and normal text mode

1
Press »TXT« to switch to teletext mode.
2
Use »1...0« to enter the page number directly or »P+« and
»P-« to switch up and down pages (to return to page 100, press
»i«).
Note:
At the bottom of the screen, you will see an information line
consisting of a red, green and, depending on the station, yellow
and blue text field. Your remote control has buttons with the
corresponding colours.
3
Press » z « (red), »
select a teletext page. This depends on the options in the infor-
mation line.
4
Press »TXT« to switch off teletext mode.

Additional functions

Skipping the waiting time
While a page is being searched for, you can switch to the television
channel.
1
Enter the teletext page number using »1...0« and then press »P«.
– As soon as the page is found, the page number is displayed.
2
Press »P« to switch to the teletext page.
Increasing character size
If you have difficulty reading the text on the screen, you can double
the character size.
1
To enlarge the character size of a teletext page, press »AV«
repeatedly.
Page stop
A multiple page may contain several sub-pages, which are auto-
matically scrolled by the transmitting station.
1
Stop the sub-pages with »PAT«.
2
Press »PAT« to quit the function.
----------------------------------------------------------------------------
¥
3
« (green), » « (yellow) or »
F
« (blue) to
19