Audio Settings - Grundig VISION 3 26-3821 Manual

SOUND
VOLUME
BALANCE
SOUND TYPE STEREO
SOUND MODE NORMAL
AVL OFF
BASS
TREBLE
HEADPHONE
CHANGE BACK
SETTINGS

Audio settings

1
Press »i« to open the »MAIN MENU«.
– The »MAIN MENU« appears.
2
Select »SOUND« with »P+« or »P-« and confirm with »OK«.
– The »SOUND« menu appears.
Volume, Bass, Treble and Balance
1
Select »VOLUME«, »BASS«, »TREBLE« or »BALANCE« with »P+«
or »P-« and adjust the setting with »
Stereo / two channel, mono
If the device receives two channel programmes, e.g. a film with the
original sound on sound channel B (display: »DUAL II«) and the
dubbed version on sound channel A (display: »DUAL I«), you can
select the sound channel you desire.
If the device receives stereo or Nicam programmes, it switches
automatically to stereo sound (display: »STEREO«).
You can switch the sound to »MONO« if the stereo reception
quality is poor.
1
Select »SOUND TYPE« with »P+« or »P-« and adjust the setting
4
with » « or »
Stereo width
Widens the audio output for stereo programmes and improves the
sound with mono reception.
1
Select »SOUND MODE« with »P+« or »P-«.
2
Select the setting »Spatial« with »
Automatic volume
The television channels broadcast at different volumes. The automatic
volume limiting (AVL) function means the volume is kept the same
when you switch between channels.
1
Select »AVL« with »P+« or »P-« and then select »On« with »
3
or » «.
Concluding the settings
1
Press »i« to finish the settings.
----------------------------------------------------------------------------------------------------
3
«.
4
4 3
« or » «.
3
« or » «.
4
«
15