The Route Bar - TomTom GO User Manual

Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time
difference in hours and half hours in the arrival information panel. The estimated time of arrival is the
local time at your destination.
2. Instruction panel. This panel shows the following information:
▪
The direction of your next turn.
▪
The distance to your next turn.
▪
The name of the next road on your route.
▪
Lane guidance at some junctions.
▪
Basic details of the turn after the next.
3. Switch view button. Select the switch view button to change between the map view and the guidance
view.
4. Speed panel. This panel shows the following information:
▪
The speed limit at your location.
▪
Your current speed. If you drive more than 5 km/h or 3 mph over the speed limit the speed panel turns
red. If you drive less than 5 km/h or 3 mph over the speed limit the speed panel turns orange.
▪
The name of the street you are driving on (landscape view only).
▪
The speed camera or risk zone report button.
5. Main Menu button. Select the button to show the Main Menu.
6. Route bar. The route bar
7. Current location. This symbol shows your current location. Select the symbol or the speed panel to open
the current location
Note: If your TomTom GO Navigation app cannot find your location the symbol appears grey.
8. Clear route button. Select this button to clear your current route.

The route bar

The route bar is shown when you have planned a route. It has an arrival information panel at the top, and a bar
with symbols underneath.
Note: The distance ahead shown by the route bar depends on the overall length of your route.
is shown when you have planned a route.
menu.
The arrival information panel shows the following information:
▪
The estimated time that you will arrive at your destination.
▪
The length of time to drive to the destination from your current location.
▪
The total time delay due to traffic jams, weather, and other incidents on
your route, including information provided from historical road usage.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus
(-) sign and the time difference in hours and half hours in the arrival
information panel. The estimated time of arrival is the local time at your
destination.
If you have stops on your route, tap and hold this panel to change between
information about the next stop and your final destination.
You can choose the information you see on the arrival information panel.
Traffic status - if your TomTom GO Navigation app isn't receiving any traffic
information, a symbol showing traffic with a cross appears underneath the arrival
information panel.
The bar underneath the arrival information panel uses symbols to show:
▪
Your final destination.
16