Planning A Route Using My Places - TomTom GO User Manual

Tip: You can also select a map symbol to open the pop-up menu, then select the Drive button to plan a
route to that location.
2. When you have found your destination on the map, select it by pressing and holding the screen for about
one second.
A pop-up menu shows the nearest address.
3. To plan a route to this destination, select Drive.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance
view is shown automatically.
Tip: You can use the location you selected in other ways, such as adding it to
pop-up menu button.
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time
difference in hours and half hours in the arrival information panel. The estimated time of arrival is the
local time at your destination.
Tip: You can add a stop to a route that you have already planned.

Planning a route using My Places

To navigate to one of My Places from your current location, do the following:
1. Select My Places from the main menu.
A list of all your Places opens.
39
My Places, by selecting the