The Route Bar - TomTom GO 4FB40 Reference Manual

7. Current location. This symbol shows your current location. Select the symbol or the speed panel
to open the quick
Note: If your GO cannot find your location using GPS or other methods, the symbol appears
gray.
8. Route bar. The route bar
Important: To see a wider route bar showing additional route information, change the setting
for Route Information.

The route bar

The route bar is shown when you have planned a route. It has an arrival information panel at the
top, and a bar with symbols underneath.
Important: To see a wider route bar showing additional route information, change the setting for
Route Information.
Note: The distance ahead shown by the route bar
menu.
is shown when you have planned a route.
The arrival information panel shows the following information:
The estimated time that you will arrive at your destination.

 The length of time to drive to the destination from your current
location.
A parking button is shown near the destination flag when parking is

available near your destination.
Tip: If your destination is in a different time zone, you see a plus
(+) or a minus (-) sign and the time difference in hours and half
hours in the arrival information
is the local time at your destination.
If you have stops on your route, select this panel to change between
information about the next stop and your final destination.
You can choose the information you see
Traffic status - if your GO isn't receiving any traffic information, a
symbol showing traffic with a cross appears underneath the arrival
information panel.
The bar uses symbols to show the following information:
 The next two
Gas stations that are directly on your route.

TomTom Traffic

TomTom Safety Cameras

Rest stops directly on your route.

You can choose the information you see on your route.
The symbols are in the order that they occur on your route. For traffic
incidents, the symbol for each incident alternates between showing the
type of incident and the delay in minutes. Select a symbol to see more
information about a stop, an incident or a safety camera. If a symbol is
shown on top of another symbol, selecting the symbols zooms in on the
route bar to show each symbol separately. You can then select a symbol.
The total time delay due to traffic jams, weather, and other incidents on
your route, including information provided by IQ Routes, is shown above
the symbols.
For a complete list of incident types, see
depends on the overall length of your route.
panel. The estimated time of arrival
stops on your route.
including heavy rain or snow.
and Danger Zones.
18
on the arrival information panel.
Traffic incidents.