Presetting Stations Automatically; Tuning To Preset Stations; Cd/Mp3/Wma/Aac; Playback - Alpine CDE-125BT Owner's Manual

Presetting Stations Automatically

1
Press BAND repeatedly until the desired radio band
is displayed.
2
Press and hold TUNE/A.ME for at least 2 seconds.
The frequency on the display continues to change while the
automatic memory is in progress. The tuner will
automatically seek and store 6 strong stations in the
selected band. They will be stored into preset buttons 1 to 6
in order of signal strength.
When the automatic memory has been completed, the tuner
goes to the station stored in preset location No.1.
• If no stations are stored, the tuner will return to the original station
you were listening to before the auto memory procedure began.

Tuning to Preset Stations

1
Press BAND repeatedly until the desired band is
displayed.
2
Press any one of the station preset buttons
(1 through 6) that has your desired radio station in
memory.
The display shows the band, preset number and frequency
of the station selected.
10
-EN

CD/MP3/WMA/AAC

SOURCE/
Rotary encoder
1
/MUTE
/ /ENT
/ESC

Playback

The following table shows which discs can be played on which
models.
CD CD-TEXT
CDE-126BT
CDE-125BT
1
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically, and the
" " indicator lights up .
When a disc is already inserted, press SOURCE/
switch to the DISC mode.
The mode will change every time the button is pressed.
TUNER DISC USB AUDIO
3
AUX* TUNER
1
* Displayed only when the iPod/iPhone is connected and AUX+
SETUP is set to OFF, refer to "Setting the AUX+ SETUP Mode"
(page 19).
2
* Displayed only when the AUX+ SETUP is set to ON, refer to "Setting
the AUX+ SETUP Mode" (page 19).
3
* Refer to "Using the Front AUX Input Terminal" (page 16).
2
While playing back MP3/WMA/AAC, press 1
2 to select the desired folder.
Pressing and holding 1
continuously.
2
VIEW
4 5
MP3 WMA AAC
to
1 2
iPod* /AUX+*
or
or 2 will change folders