Radio; Radio Basic Operation; Listening To The Radio; Presetting Stations Manually - Alpine iLX-W650 Owner's Manual

Radio

Radio main screen example
Band button
Switches a band.
Information display
Preset button
Displays the preset stations with a short touch.
Touch for at least 1 second to memorise the current station as a
preset station.
Plays each preset station for about 5 seconds.
Memorises stations automatically
Searches a station, and then plays it for about 5 seconds.
Increases frequency
Touch and hold to change the frequency continuously.
Decreases frequency
Touch and hold to change the frequency continuously.

Radio Basic Operation

Listening to the Radio

1
Touch the (HOME) button and select radio mode.
The display shows the radio mode screen.
2
Select the desired band from [FM1] / [FM2] / [FM3] /
[AM].
3
Touch [ ], [ ] to change the radio frequency up or
down respectively.
Touch and hold to change the frequency continuously.
26
-EN

Presetting Stations Manually

1
Tune in a desired radio station you wish to store in the
preset memory by manual or automatic seek tuning.
2
Touch and hold the Preset number you want to store for
at least 1 second.
The selected station is stored.
3
Repeat the procedure to store up to 5 other stations
onto the same band.
To use this procedure for other bands, simply select the desired
band and repeat the procedure.
A total of 24 stations can be stored in the preset memory
(6 stations for each band; FM1, FM2, FM3, or AM).
• If a preset memory has already been set in the same preset number, it
will be cleared and the new station will be memorized.

Presetting Stations Automatically

The tuner can automatically seek and store 6 strong stations in the
selected band in ascending order of frequency.
Select the desired band then touch and hold [A.MEMO].
The tuner automatically seeks and stores 6 strong stations into the
preset buttons in ascending order of frequency.
When automatic storing has completed, the station stored in the
preset 1 is selected.
• If no stations are stored, the tuner will return to the original station you
were listening to before the automatic storing procedure began.
• You can cancel this process by touching [A.MEMO] while the tuner is
automatically seeking stations. Canceling will return the tuner preset to
the previous setting.

Tuning to Preset Station

After selecting the desired band, touch the desired preset
button.

Scanning Stations

The tuner can automatically seek and plays the station for 5 seconds
each.
1
After selecting the desired band, touch [F.SCAN].
Scanning stations starts.
2
When the desired station is played, touch [F.SCAN]
again.

Scanning Preset Stations

The tuner can automatically play preset stations for 5 seconds each.
1
After selecting the desired band, touch [P.SCAN].
Scanning preset stations starts.
2
When the desired station is played, touch [P.SCAN]
again.