Setup; Bluetooth Setting; Setting The Bluetooth Connection (Bt In); Sound Customizing - Alpine CDE-125BT Owner's Manual

SETUP

You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, Sound Customizing, Visual
Customizing, etc., can be modified.
SOURCE/
Rotary encoder (AUDIO)
/MUTE / /ENT
Use steps 1 to 4 to select one of the SETUP modes to
modify. See the applicable section below for details
about the selected SETUP item.
1
Press and hold SOUND/SETUP for at least
2 seconds to activate the SETUP mode.
2
Turn the Rotary encoder to select the desired
SETUP menu, and then press
(e.g. Select SUBWOOFER)
1
BT IN CLOCK ADJ*
2
AUX+ NAME* AUX NAME
SUBWOOFER SUBW SYS*
DIMMER SCROLLTYPE
1
* Refer to "Setting Time" (page 9).
2
* Displayed only when AUX+ SETUP is ON.
3
* Displayed only when SUBWOOFER is ON.
4
* CDE-126BT only.
3
Turn the Rotary encoder to change the setting.
(e.g. Select SUBW ON or SUBW OFF.)
4
Press and hold SOUND/SETUP for at least 2
seconds to return to normal mode.
• Press /MUTE to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
SOUND/SETUP
/ /ENT.
PLAY MODE AUX+ SETUP
POWER IC DEMO
3 4
ILLUMINATI*
TEXT SCR BT IN

BLUETOOTH Setting

Setting the BLUETOOTH Connection (BT IN)

BT ADAPTER (Initial setting) / BT OFF
With BLUETOOTH technology, you can place a hands-free call by a
BLUETOOTH-equipped mobile phone.
Set ADAPTER when the BLUETOOTH function is used. For details on
the set up procedure, refer to "BLUETOOTH SETUP" on page 20.
• If the mobile phone compatible with the Voice Dial function is
connected, the Voice Dial function can be used.

Sound Customizing

Subwoofer On and Off

SUBW ON (Initial setting) / SUBW OFF
When the subwoofer is on, perform the steps below to adjust the
subwoofer output level.
1 In the normal mode, press Rotary encoder (AUDIO)
repeatedly to select the SUBWOOFER mode.
SUBWOOFER BASS LEVEL
FADER DEFEAT
2 Adjust the level by turning the Rotary encoder.

Setting the Subwoofer System

SUBW SYS 1 (Initial setting) / SUBW SYS 2
Select either SYS 1 or SYS 2 for the desired subwoofer effect.
SUBW SYS 1: Subwoofer level changes according to the main
volume setting.
SUBW SYS 2: Subwoofer level change is different from the main
volume setting. For example, even at low volume
settings, the subwoofer is still audible.

Visual Customizing

Changing Lighting Color (CDE-126BT only)

ILUM TYPE1 (Initial setting) / TYPE2
You can change the lighting color of the following four buttons.
SOURCE/ , BAND, ,
TYPE1: When the color of the four buttons is blue, the color of
the other is blue.
TYPE2: When the color of the four buttons is red, the color of
the other is red.

Dimmer Control

DIM AUTO (Initial setting) / DIM MANUAL
Set the DIMMER control to AUTO to decrease the illumination
brightness of the unit with the head lights of the vehicle ON. This mode
is useful if you feel the unit's backlighting is too bright at night.
• The function is inoperable when the ILLUMINATI is set to other than
TYPE1 for CDE-126BT, refer to "Changing Lighting Color (CDE-
126BT only)" on page 17.
TRE LEVEL BALANCE
VOLUME SUBWOOFER
.
17
-EN