Product Hin / Code Requirements / Safety Warning - Pentair MASTERTEMP 200HD Installation And User Manual

Section 1. Heater Identification Information
2
Heater Identification Information (HIN)
To identify the heater, see the data rating plate on the inner front panel of the heater. There are two designators for
each heater, one is the Model Number and the other is the Heater Identification Number (HIN).
Heater Identification Number (HIN)
The following example simplifies the identification system:
1) MT : MasterTemp
2) Model Size : (200, 300 or 400) : Input rating (Mega Joule [MJ]/hr)
3) Construction : (HD = Heavy Duty Model)
4) Fuel Type : (LP = Propane gas or N = Natural gas)
HEATER IDENTIFICATION NUMBER
ID DESIGNATOR FOR PENTAIR POOL AND SPA MASTERTEMP HEATERS
Example:
1 2 3 4
MT HD N
300
Heater Data Rating Plate
The heater data rating plate is located on the inner front panel of the heater. To access the data rating plate, unbolt and
remove the side door access panel as shown below.
Heater Data Rating Plate Location
Top Panel
Remove this Door
Access Panel to access
the DATA RATING PLATE
MasterTemp Pool and Spa Heater
H. I. N.
N = NATURAL GAS
FUEL TYPE =
LP = PROPANE GAS
HD = HEAVY DUTY MODEL
MODEL SIZE = BTU/hr GROSS INPUT
200 (200 [ ), 300 (300 [ ) or 400 (400 [
BTU/hr BTU/hr
MT = MASTERTEMP
Door
Access
Panel
)
BTU/hr
DO NOT REMOVE
TM
AUSTRALIA ONLY
GAS SAFETY CERTIFICATION
P/N 474131 Rev. M 8/2020