Visca Board - Sony IPELA XIS-10DC Service Manual

2-9-3. VISCA Board

Removal
1. Remove the lower cover.
(Refer to Section 1-2-2.)
2. Remove the clear dome assembly.
(Refer to Section 1-2-3.)
3. Remove the camera stay cover, camera case
(upper), and inner case.
(Refer to steps 4 to 6 in Section 2-3.)
4. Disconnect the harness from the three
connectors on the VISCA board.
5. Remove the four screws, and remove the
VISCA board.
Installation
6. Reinstall the VISCA board in the reverse
order of steps 4 and 5.
7. Reassemble the unit in the reverse order of
steps 1 to 3.
XIS-10DC
B2 x 4
VISCA board
2-19 (E)