Using The Stack Bypass - Canon imagePRESS C1+ Manual

Using the Stack Bypass

Reserved printing using the stack bypass is possible only if paper is being fed from
the stack bypass for the current job.
The following example assumes that A3 plain paper is being fed from the stack
bypass for the current job, and that you are selecting A4 plain paper to be fed from
the stack bypass for a reserved job.
IMPORTANT
When coating special types of paper, such as heavy paper or transparencies, be sure to
2
correctly set the paper type, especially if you are using heavy paper. If the type of paper
is not set correctly, it could adversely affect the quality of the image. Moreover, the fixing
unit may become dirty, or the paper could jam, and a service repair may be needed.
NOTE
•
If Stack Bypass Standard Settings in Common Settings (from the Additional Functions
screen) is set to 'On', reserved coating can be performed only for the registered paper
size and type. (See Chapter 4,"Customizing Settings," in the Reference Guide.)
•
For information on paper types, see Chapter 2, "Basic Operations," in the Reference
Guide.
•
For instructions on entering values in inches, see Chapter 2, "Basic Operations," in the
Reference Guide.
2-12
Reserving Jobs