Canon imagePRESS C1+ Manual page 37

1
Load the preprinted paper into a paper source.
NOTE
For instructions on loading preprinted paper, see "Loading Preprinted Paper," on p.
1-8.
2
Select the loaded preprinted paper.
NOTE
For instructions on selecting preprinted paper, see "Selecting Preprinted Paper
(Paper Select)," on p. 1-9.
3
Press [Clear Coat Entire Page].
4
Press [Enter No. of Sheets] to specify the number of sheets to
be coated.
5
Press [Enter No. of Copies] to specify the number of copies to
be coated.
6
If necessary, specify the Finishing or 2-Sided mode settings.
NOTE
•
For instructions on the Finishing mode, see "Collating Coated Paper (Finishing),"
on p. 1-16.
•
For instructions on the 2-Sided mode, see "Coating Both Sides of Preprinted Paper
(2-Sided)," on p. 1-24.
7
Press [Start Coating].
Coating Full Surface of Preprinted Paper (Clear Coat Entire Page)
2
2-3