Stack Bypass - Canon iR2545i Troubleshooting Manual

3
4
IMPORTANT
After you have cleared all the paper jams, make sure to return all the levers and
covers to their original positions. Once you have removed all of the jammed
paper, printing resumes.
If paper is jammed in the stack bypass, follow the procedure below to remove
the jammed paper.
Page 22 of 39
Remove any jammed paper.
Place your hand where the
hand symbol () is located on the
right cover of the main unit, and
then gently close the right
cover until it clicks into place.
A
,
M Open right cover, and follow the label Recover
instruction to remove paper.
When finished, close all covers.
The paper has jammed.
CAUTION
When closing the cover, be careful
not to get your fingers caught, as
this may result in personal injury.
Later
System Monitor